Looking to remove load wheels on your manual pallet jack?
Below are basic guidelines for removing load wheel assemblies within the load wheel bracket of a Lift-Rite L-50 manual pallet jack...
Tip: Recommend to service one assembly at a time, using the other as a reference.
Remove the nut and washer from the axle bolt. Slide the axle bolt out of the brackets and remove the load roller. Remove the load roller axle sleeve from the load roller.
Load Roller Brackets
You only need to replace the load wheel bracket if damaged or worn. Remove the load roller. With a pin punch and hammer, drive out the roll pin that fastens the pivot axle to the frame, then drive the pivot axle out of the frame, exit roller, and brackets. Pull the push rod away from the frame and slide the brackets off the push rod.
Coming next, learn how to install load rollers onto load wheel bracket...